cGMP, GLP - FDA Approved, ISO-9001, ISO-14001, ISO/IEC 17025, ISO ISO-45001, HACCP, FSSC 22000, FSSAI, "REACH" Registered, Kosher & Halal Certified. We observe WHO Good manufacturing practice and Good laboratory practice.
Search for the supplies that you need here:
------Aluminium Stearate, Aluminum Monostearate & Aluminum Distearate USP NF Grade Manufacturers
Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA, Dubai and UAE. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards. We can supply the material in grams for your laboratory trial and in tons for your plant scale jobs.
Our manufacturing facility is FDA approved and cGMP, GLP (FDA) Approved, ISO-9001, ISO-14001, ISO/IEC 17025, ISO OHSAS 18000, ISO 22000-2005 HACCP, FSSAI, FSSC-22000, certified. Apart from good manufacturing practice, we also follow good laboratory practice. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape. We observe WHO Good manufacturing practice and Good laboratory practice.
Aluminum Monostearate or Aluminium Monostearate SDS of Manufacturers藤田话配音藤田话配音,性8x电台性8x电台
Aluminum Distearate or Aluminium Distearate SDS of Manufacturers
Aluminum Monostearate or Aluminium Monostearate: CAS Number: 7047-84-9, EINECS EC Number: 230-325-5, Molecular Formula: H3(CH2)16COOAl(OH)2 or Al(OH)2C18H35O2, Molecular Weight: 344.47, HS Code ---**
Aluminum Distearate or Aluminium Distearate: CAS Number: 300-92-5, EINECS EC Number: 206-101-8, Molecular Formula: C36H71AlO5, Molecular Weight: 610.93, HS Code ---**
We manufacture and supply Aluminum Monostearate or Aluminium Monostearate and Aluminum Distearate or Aluminium Distearate. The material can be tailor made as per buyers' requirement.
Aluminum monostearate or Aluminium monostearate is an organic compound which is a salt of stearic acid and aluminium. It is also referred to as dihydroxy(octadecanoato-O-)aluminium or dihydroxy(stearato)aluminium. It is used to form gels in the packaging of pharmaceuticals, and in the preparation of colors for cosmetics.
Properties and Specifications of Aluminum Monostearate or Aluminium Monostearate:
Appearance: Colorless or white powder.
Moisture: 3# maximum.
Melting point: around 155C literature.
Boiling point: Decomposes.
Relative density: 1.02
Solubility: Insoluble in cold water.
Aluminum Monostearate USP NF Grade:
Dihydroxy(stearato)aluminum --- CAS 7047-84-9.藤田话配音藤田话配音,性8x电台性8x电台
Aluminum Monostearate is a compound of aluminum with a mixture of solid organic acids obtained from fats and consists chiefly of variable proportions of aluminum monostearate and aluminum monopalmitate. It contains the equivalent of not less than 14.5 percent and not more than 16.5 percent of Al2O3, calculated on the dried basis.
Packaging and storage: Preserve in well-closed containers.
A: Heat 1 g with a mixture of 25 mL of water and 5 mL of hydrochloric acid for 1 hour, replacing the water as it evaporates: fatty acids are liberated, floating as an oily layer on the surface of the liquid, and the water layer responds to the tests for.
B: Mix intimately 25 g with 100 mL of ether in a 500-mL flask, add 150 mL of 3 N hydrochloric acid, attach a water-cooled condenser, and heat on a steam bath under reflux for 15 minutes. Cool, and transfer both layers to a separator with the aid of an additional 100 mL of ether. Shake vigorously and allow the layers to separate. Remove the water layer and wash the ether layer with three 30 mL portions of water. Transfer the ether layer to a small beaker, warm on a steam bath until the ether has evaporated and the fatty acids are clear, and dry the acids at 105 for 20 minutes: the solidification temperature of the fatty acids is not below 54C.
Loss on drying: Dry it at 80C for 16 hours: it loses not more than 2.0% of its weight.
Arsenic: -- The limit is 4 ppm.
Heavy metals: -- The limit is 50 micro-gm per g.
Assay: Accurately weigh 5 g of Aluminum Monostearate in a covered platinum crucible that previously has been ignited for 20 minutes, cooled over anhydrous magnesium perchlorate, and weighed. Heat the open crucible gently, without allowing the specimen to burst into flame and gradually increase the heat until the ash is white. Ignite the ash for 20 minutes after the organic matter is removed, and cool. Add 15 mL of water, cover the crucible with a small watch glass, and boil gently for 5 minutes, using a small stirring rod to break up any large lumps of ash. Decant the solution through ash-less filter paper, retaining most of the ash in the crucible. Repeat the extraction with water twice, passing the solutions through the same filter. Transfer the ash to the filter by means of a fine stream of water and wash the crucible and the residue three times with warm water. Transfer the filter paper and the residue to the crucible, dry, and ignite for 20 minutes after the filter paper has burned away. Following the ignition period, cover the crucible, cool over anhydrous magnesium perchlorate for 15 minutes, and weigh the residue of Al2O3 rapidly. Repeat the ignition until constant weight is attained, using 20-minute ignition periods and 15-minute cooling periods. From the weight of the residue remaining in the crucible, calculate the content of Al2O3.
Aluminum distearate exists as white powder and is an aluminum salt of stearic acid. In the pharmaceutical industry, it is used as an anticaking agent; colorant; emulsion stabilizer; and viscosity increasing agent. According to the FDA, aluminum stearate is considered safe for general or specific, limited use in food.Properties and Specifications of Aluminum Distearate or Aluminium Distearate:
Appearance: Colorless or white powder.
Assay: 10.5-12.5 Alumina.
pH: 5.5 to 7.2
Loss on drying: 1.5% maximum at 105C for 3 hours.
Ignition residue: 10% to 12%
Gel Quality: Translucent.
Relative density: around 1.01
Melting point: around 145C literature.
Boiling point: Decomposes.
Solubility: Insoluble in water.
Taloja Mumbai and Ankleshwar, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) +91-22-23726950, +9123774610, +9123723564
Copyright and Usual Disclaimer is Applicable
Last updated 3-sep-20
Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.
Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.
Fast Selling IP BP Ph Eur EP USP Analytical Reagent FCC Food Grades of Chemicals by Anmol Chemicals
Acetic Acid Glacial --- Aluminum Chloride --- Ammonium bicarbonate --- Ammonium Carbonate --- Ammonium Chloride --- Benzoic Acid --- 藤田话配音藤田话配音,性8x电台性8x电台Benzyl Alcohol --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid --- Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Octyldodecanol --- Oleic acid --- Phenylethyl Alcohol --- Propylene Carbonate --- Potassium Bromide --- Potassium Bicarbonate --- Potassium Carbonate --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Alum --- Selenious Acid --- Sodium Acetate --- Sodium Butyrate --- Sodium Bicarbonate --- Sodium Chloride --- Sodium Molybdate --- Sodium Selenite --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Sulfide --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Butylated Hydroxyanisole --- Butylated Hydroxytoluene --- Sodium Bromate --- Sodium Diacetate -
Aluminum Monostearate & Aluminum Distearate USP NF Grades Manufacturers